Carbon capture and storage projects need monitoring that addresses site-specific risks, regulatory commitments and the physical response of the storage complex. Surface movement is one of the observable responses, and InSAR can measure it before and during injection where deformation reaches the surface. A pre-injection baseline gives every later observation essential context.
Define what surface deformation can demonstrate
Carbon storage assurance relies on several lines of evidence, including subsurface monitoring and operational records. Satellite InSAR observes slow movement at suitable surface targets, establishing a pre-injection baseline and following later deformation. Tracking COâ‚‚ underground, locating the plume and demonstrating caprock containment require specialized subsurface evidence and modeling. Being clear about these roles makes the monitoring plan more credible to engineers, regulators and local communities.
Build the baseline before injection
Define the storage area, monitoring footprint, nearby infrastructure and observation period. Use site models to define the expected range of deformation, check the suitability of historical satellite imagery and document areas with weaker measurement quality.
Relate surface observations to geology, groundwater conditions, seismic data and other approved monitoring methods, and specify how viewing direction and uncertainty will be reported. Where injection or construction changes the surface, explain how future measurements will be compared with the baseline. Our article on what InSAR can prove about CO2 storage covers detectability in more detail.
Explain the response to an unexpected trend
Unexpected deformation should trigger verification and multidisciplinary review. Teams can compare its timing and footprint with operational data, pressure measurements, subsurface models and independent surveys. The plan should state who decides whether more monitoring is needed and how results are documented. A traceable record of observations and investigations supports assurance. Learn more about SkyGeo's work in carbon capture, utilization and storage.
Frequently asked questions
-
Surface deformation before and during injection, which may relate to injection or to other causes.
-
Pressure data, seismic monitoring, geomechanical models and the regulatory monitoring program.
-
Neither. Surface movement is one line of evidence, interpreted together with subsurface monitoring.
-
Before injection, to set a baseline, then on a schedule that complements the site monitoring plan.
-
Review the monitoring objectives and the expected surface signal before choosing an InSAR approach.